Edison... wtaf...
Hi guys, Halfway through flashing (rm -rf\.*) the board disconnected and will not show up in finder as a drive. I have attempted different cables, an external power supply (on both the usb power hub...
View ArticleClik here to view.
Re: Intel Centrino N-6235 on Galileo Gen 1...
Hi! Thanks for your reply! Wi-Fi works on all of my 3 Galileo, with ConnectAnyThing hotspot and over Ethernet. That part works fine! I didn't change anything, I just rebooted a couple of times. But...
View ArticleRe: Hardware virtualization is blocked in Win 7 Pro 64-bit Dell machine -...
To all watching this thread - You are NOT going to believe this. I found the cause of the problem, and it's...AVAST !!! On my Win 8, where HAV says it works, I do NOT use Avast AV. I've been using...
View ArticleCannot get surround sound to work over HDMI to Xbox One
New NUC with Intel HD 5000 Graphics. NUC -> HDMI -> Xbox One (pass through) -> optical Toslink -> Denon AVR 3803 5.1 Installed BIOS update (latest available on NUC download page... 24 I...
View ArticleRe: Hardware-assisted Virtualization is Not Enabled - Win7/Pro & XP Mode
baumgrenze - I have had the same problem, and you are NOT going to believe this, but I found the cause, and it's...AVAST !!! On my Win 8, where HAV says it works, I do NOT use Avast AV. I've been...
View ArticleRe: Intel Xeon Phi Coprocessor 7120P / 1.238 GHz processor board in CAD...
You will get a better response in the Processors forum.I have moved your post there. Doc
View ArticleRe: Where is the "Edison Native Application Guide" PDF?
b1tninja, while I do have a copy of that document, I have seen many improvements and enhancements that obsolete much of that document as far as procedures go. As far as the gist - gcc/python on the...
View ArticleCP2102 driver
Does anybody have any pointers on getting a CP2102 driver installed in the Edison Yocto distribution? I've verified that my Edison can see the USB device just fine with dmesg, but it doesn't create a...
View ArticleRe: Edison opkg package repo created
I'm attempting to npm install openzwave, which builds the openzwave C++ library, which depends on libudev. The opkg repo contains libudev1, but that's just the shared libraries, and there's no...
View ArticleHow to set Python Environment prior to login so can run a python program at...
Hi AllI am trying to run a python program that activates the I2C bus and displays the IP address on a I2C LCD.I have a script that runs ntpd and then starts a python program on startup, but when the...
View ArticleClik here to view.
D54250WYKH USB 3 does not work with 7260HMW
Couldn't use a Leef USB 3 flash drive, neither for booting nor was it recognized by the os. Found a hint that the problem might be an incompatibility with the wifi card. After removing the card the...
View ArticleRe: How best proceed with overheating i7-4790K?
I'm running computation for chemistry with it and it peaked to 100C in seconds with Turbo boost. Once I transfer it to the Hero, I will use the Hyper 212 Evo to cool it to see if there is any change. I...
View ArticleClik here to view.
Re: How best proceed with overheating i7-4790K?
Now that you stated that motherboard was your problem I payed attention to this VCORE value on the motherboard. Is this normal?
View ArticleRe: Edison on development Arduino board will not respond from putty
Do you have a second micro-B cable? Plug in both if you do, and you should see both in the Ports menu in the "device manager" utility, one as a regular com port, and the other as a virtual com port....
View ArticleRe: How best proceed with overheating i7-4790K?
The thing is that the CPU is probably fine. It's the motherboards. Don't know if its something wrong with bios setting or defective component like power vrm.
View ArticleRe: Best processor upgrade for a HP Pavilion Elite m9050la?
The E4500 uses socket LGA775: ARK | Intel® Core™2 Duo Processor E4500 (2M Cache, 2.20 GHz, 800 MHz FSB)Processors that are compatible with the 945G chipset are: ARK | Intel® 945G Express Chipset...
View ArticleRe: How best proceed with overheating i7-4790K?
The Vcore changes based on the load of the CPU. The 1.8V value looks like the Vinput than the Vcore, the 0.7 - 1.199V is probably the Vcore.The CPU does have variation between them. My previous one...
View ArticleRe: How best proceed with overheating i7-4790K?
That is probably supposed to be CPU input voltage not Vcore.
View Article
