Hi what,
You can update the firmware with the IDE, but that will only update it to the latest version of 0.7.5. Now if you want to update to 1.0.0 which has not been verified for Galileo. To manually update the firmware you will need a 3.5mm to RS232 and RS232 to USB. I recommend updating the firmware on the IDE first then process with the following at your own risk. Note that it is critical that the .efi and .cap are matching pairs. In other words make sure they are both 1.0.0.
- Copy the .efi and .cap file to a blank SD card in the root directory
- Open a Putty session, click F7 to show boot options
- Then select UEFI Internal Shell
- Press ESC
- Type fs0:
- Type CapsuleApp.efi Flash100.cap
Do not disconect power supply from Galileo while updating the firmware. It should take about 5 minutes or so. After the update is complete then you can use the Linux image you built or downloaded from AlexT’s website.
Regards,
Intel_Jesus